ET200SP

Scale-able, flexible, modular I/O system with IP20 protection

The scalable SIMATIC ET 200SP I/O system is a highly flexible, modular I/O system with IP20 degree of protection. Via an interface module with PROFINET or PROFIBUS interface it can exchange IO data of the connected I/O modules with a higher-level control system. Alternatively, as further head-end stations, various PLC, F-PLC and Open Controllers are available as compact S7-1500 Controllers (Distributed Controller). ET 200SP components are available as SIPLUS version for extreme requirements and a high degree of robustness.

For ET 200SP, a comprehensive range of I/O modules, including fail-safe versions, is available:

Digital input modules (DI), with color coding white
Digital output modules (DQ), with color coding black
Analog input modules (AI), with color coding light blue
Analog output modules (AQ), with color coding dark blue
Technology modules (TM), with color coding turquoise
Communication modules (CM), with color coding light gray
Special modules, with color coding mint green
Motor starters as direct on-line starters (DS) and reversing starters (RS)
Pneumatics

Apart from the standard type of delivery as an individual package, selected I/O modules and BaseUnits are also available in a pack of 10 units. The pack of 10 units enables the amount of waste to be reduced considerably, as well as saving the time of unpacking individual modules.

Compact design

Modular configuration with up to 64 modules
System-integrated self-assembling load group supply without power module via light BaseUnits
Small size and highly flexible due to the modular design and comprehensive product range
Up to 16 channels per module
Permanent wiring
Hot swapping: Module replacement without tools in RUN
Operation with gaps

Flexible connection system

Push-in terminals for cross-sections up to 1.5 mm² with wire end ferrule, and up 2.5 mm² without wire end ferrule
BaseUnits for 1-wire or direct multi-wire connection
Optimum accessibility for wiring due to spring release and measuring tap next to the conductor opening
Flexible PROFINET connection via BusAdapter (RJ45, FastConnect, plastic or glass fiber-optic cables), also as integrated media converter

Safety Integrated

Easy integration of fail-safe modules
Easy F parameter assignment via software
Group-by-group disconnection of non-fail-safe modules

High performance

Isochronous PROFINET
Internal data transfer with up to 100 Mbps
Record analog values and output as of 50 µs
Record digital values and output as of 1 µs

High-performance technology

Modules for the functions Counting, Positioning, Weighing, Output cams, PWM, Force measurement, etc.

Energy efficiency

Energy meter for recording electrical variables
System-integrated PROFIenergy with interval substitute values

Advanced functions

Configuration control:
application-based adaptation of the actual configuration via user software (option handling)
Time-based IO:
time stamping of the signals to the µs
MSI/MSO:
Simultaneous access to I/O data from up to 4 PLCs
MtM:
Direct data exchange between IO modules (Module-to-Module communication)
Oversampling:
n-fold acquisition or output of digital and analog signals within a PN cycle
Adaptation of measuring range:
increased resolution by adapting the measuring range to a limited section of a measuring range supported by the analog input module
Scaling of measured values:
permits the transmission of the analog value normalized to the required physical value as a REAL value (32-bit floating point)

Communication standards

PROFINET IO
PROFIBUS DP V0/V1
ET connection for connecting the ET 200AL (IP67)
IO-Link V1.1
AS-Interface
Modbus TCP
Point-to-point (RS 232, RS 485, RS 422)
Freeport
3964(R)
USS
Modbus RTU (master/slave)

CPU

PROFINET connection with 3 ports
IO controller and PN IO device
Optional expansion as DP master/slave
Also as fail-safe version and Open Controller

Labeling of I/O modules

Meaningful labeling on the front of the I/O modules
- Module type in plain text including function class, e.g. "DI 8x24VDC HF"
- Article No.
- 2D matrix code with article and serial number
  (with call via the "Industry Online Support" app, direct link to the support page of the module)
- Hardware functional status and firmware version
- Suitable BU type for the respective I/O module
- Color code of the suitable color-coding plate
- Connection diagram
Optionally expandable with
- Labeling strips
- Equipment labeling plate

Simple application

Free selection of the PROFINET connection system and characteristics via bus adapter
No tools needed for one-handed wiring using push-in terminals
Simple system-integrated expansion with additional potential through potential distribution modules
Improved accessibility of the wiring due to new arrangement of the spring NC contacts alongside the associated conductor aperture
Maximum clarity due to the use of color and reference code plates, as well as labeling strips
Diagnostics functions
Wiring test, diagnostics, naming etc. using the free PRONETA software tool

Compact design

The station can be expanded up to 64 modules (depending on the interface module)
Minimal space required in the control cabinet
Compact dimensions, suitable for 80 mm standard control cabinets

Strong performance

High-sped communication over PROFINET
Module and terminal box can be replaced during operation ( "hot swapping")
Consistent shielding of conductor via terminal box and backplane bus to the PROFINET cable
Greater energy efficiency due to system-integrated PROFIenergy
Configuration control via software

SIMATIC ET 200SP is a multifunctional distributed I/O system for a wide range of applications. Thanks to its scalable design, you can gear the I/O station exactly to the on-site requirements. SIMATIC ET 200SP is constructed with IP 20 protection and designed for installation in a control cabinet